Nov 15, 2012 CTEK MXS 5.0 Car Battery Charger Unboxing and Battery Replacement - Duration: 30:56. Nonsensical Child 13,389 views. AWESOME IDEA! HOW TO TWIST ELECTRIC WIRE TOGETHER!
To the purchase of your new professional switch mode battery charger. This charger is. Included in a series of professional chargers from CTEK SWEDEN AB and represents the. Latest technology in battery charging. CTEK COMFORT CONNECT – eyelet M6. CTEK COMFORT CONNECT. CTEK COMFORT CONNECT – clamp. MANUAL on the purchase of your new professional switched mode battery charger and battery check instrument. This charger is included in a series of professional chargers from CTEK SWEDEN AB and represents the latest technology in battery charging. MAINS CABLE H05RN-F Rubber SUPPLY PLUG. CTEK COMFORT CONNECT HOW TO CHARGE 1.
6 • EN
CONNECT AND DISCONNECT THE CHARGER TO A BATTERY
INFO
If the battery clamps are incor-
rectly connected, the reverse
polarity protection will ensure that
the battery and charger are not
damaged.
For batteries mounted inside a
vehicle
1. Connect the red clamp to the bat-
tery's positive pole.
2. Connect the black clamp to the
vehicle chassis remote from the fuel
pipe and the battery.
3. Connect the charger to the wall
Ctek Mxs 5.0 Manual Dansk
socket
4. Disconnect the charger from the wall
socket before disconnecting the battery
5. Disconnect the black clamp before
the red clamp.
Some vehicles may have posi-
tively earthed batteries.
1. Connect the black clamp to the bat-
tery's negative pole.
2. Connect the red clamp to the vehicle
chassis remote from the fuel pipe and
the battery.
3. Connect the charger to the wall
socket
4. Disconnect the charger from the wall
Ctek 5.0
socket before disconnecting the battery
5. Disconnect the red clamp before the
black clamp.
STEP 1 DESULPHATION
Detects sulphated batteries. Pulsing current and voltage, removes sulphate from the lead
plates of the battery restoring the battery capacity.
STEP 2 SOFT START
Tests if the battery can accept charge. This step prevents that charging proceeds with a
defect battery.
STEP 3 BULK
Charging with maximum current until approximately 80% battery capacity.
STEP 4 ABSORPTION
Ctek Mxs 5.0 User Manual Instructions
Charging with declining current to maximize up to 100% battery capacity.
STEP 5 ANALYSE
Tests if the battery can hold charge. Batteries that can not hold charge may need to be
replaced.
STEP 6 RECOND
Choose
the Recond program to add the Recond step to the charging process. During the
Recond step voltage increases to create controlled gassing in the battery. Gasing mixes the
battery acid and gives back energy to the battery.
STEP 7 FLOAT
Maintaining the battery voltage at maximum level by providing a constant voltage charge.
STEP 8 PULSE
Maintaining the battery at 95–100% capacity. The charger monitors the battery voltage
and gives a pulse when necessary to keep the battery fully charged.
Comfort
Ctek Mxs 5.0 User Manual Diagram
Connect
Comfort
Connect
+
+
–
–
Comfort
Connect