Edwards Solar Hot Water User Manual

Product Description. The Edwards Solar hot water systems come in several variations. The main distinction is between systems that heat the water directly in the solar collectors, and closed-loop systems that circulate an anti-freeze fluid through the collectors which in turn transfers heat to the water in the storage cylinder. Solar Hot Water Parts has the largest range of replacement spare parts, catering for all makes and models of solar hot water systems on the market.

It is important to know that there are no user serviceable components in the system, and as such,it is recommended that no covers be removed and no adjustments made to the system settings by anyone other than an authorised Conergy representative.

To save a service call you may like to review our troubleshooting guide.

If there is not enough hot water, it is recommended that the following points are considered before making a service call. If after checking the following points the problem has not been identified, please contact Superior Solar on 4323 9050 or your installer.

Solar Hot Water New York

Low Solar Energy Input / Shading
If there have been prolonged periods of cloudy weather, or winter is approaching, it may be necessary to reconsider the permitted AES allowance for time-clock controlled systems, turn on the AES for systems with a booster isolation switch or turn on the gas supply to gas AES models.

Often trees or other buildings can shade the solar collectors, or there can be a dirt build up on the glass cover. Trees should be cut back if possible, or the system relocated if removal of the shading is not possible, in the present location. If the glass is dirty, this should be cleaned with any normal domestic glass cleaner.

Ancillary Energy Support (Booster System) not operating
For electric systems, the fuse, circuit breaker supplying the AES System should be checked.

If the time clock (where fitted) and the fuse or circuit breaker are operational and the water is cold, you can turn the booster isolator on and off to see if the electricity meter speed changes. If there is no change in speed, it indicates there may be a booster problem and a service call will be necessary. It is important to remember DO NOT open or adjust any electrical covers or devices yourself.

For gas systems the gas and electric supplies to the gas heater should be checked to ensure they are both on. If water temperature from the gas heater is below 60 degrees C and both supplies are on and the gas heater does not ignite there may be a problem and a service call will be necessary.

Excessive water discharge from the Valves?
If there is a discharge of more than 10 litres per day from any of the system’s valves, it indicates there is a problem that requires a service call.

Residential Solar Hot Water Systems

Are you using more hot water than you think?
Often the hot water usage of showers, washing machines and dishwashers is under estimated.

Review these appliances to determine if your daily usage is greater than the storage volume of your water heater. Refer to the section “What system do I have?” in the manual to determine the storage volume of your water heater. It is also advisable to inspect tap washers etc. for leakage and replace if necessary.View all Solar Manuals here.

What should I do during holidays?
If you are going to be away for a week or more during the summer months, it is advisable to turn off the electricity supply to the AES System.

The power supply to the solar controller pump module must be left ON, so that the system can monitor and control the solar collector temperature while you are away. Whilst the system is safe with the power turned OFF, the collector can reach very high temperatures, causing high stress to their internal components.

For more information please review your system manual.

To save a service call you may like to review our troubleshooting guide.

What should I do during holidays?

If you plan to be away for only a few nights, we suggest you leave the water heating system switched on.

If it is necessary to switch off the water heater, do so as outlined below:

Electric Boosted systems: Switch off the electric supply to the supplementary heating element. The switch is usually marked and located in the electricity meter box of the dwelling.

Gas Boosted systems: Switch off the electric supply to the gas booster.

To turn the system back on

Electric Boosted system: Switch on the electric supply to the supplementary heating element. The switch is usually marked and located in the electricity meter box of the dwelling.

Gas Boosted systems: Switch on the electric supply to the gas booster.

For more information please review your system manual and Rinnai’s troubleshooting guide.

If you are going to be away for a period of a week or more during the summer months it is advisable to turn off the electricity supply to the booster. It is a possibility that the high temperature valve in the storage tank may open for a short period to reduce the storage tank temperature while you are away. This is a normal function and does not harm the system.

Why a pressure temperature valve?
All Thermotec SUMMER solar water heaters have a high pressure relief safety valve in the hot water storage tank. This is required by law for all hot water storage appliances.
For solar water heaters that only have a pressure & temperature valve located on the storage tank it is normal for a small water discharge to occur during the heating cycle of the system. The water discharge is water expanding due to the heating process. Normally the discharge will be less than 9 litres per day.
For systems that have both a Pressure & Temperature valve and a Cold Water Expansion valve located in the cold water supply pipe work, the expansion discharge will occur through the Cold Water Expansion valve.

Troubleshooting

If there is not enough hot water it is recommended that the following points are considered before making a service call.

Low Solar Energy Input. If there have been prolonged periods of cloud or winter is approaching, it may be necessary to reconsider the permitted boosting time for time-clock controlled systems or to turn on the booster for systems with a booster isolation switch.

Solar collector shading. Often trees or other buildings can shade the solar collectors or there can be a dirt build-up on the glass cover. Trees should be cut back if possible or the system relocated if removal of the shading is not possible in the present location. If the glass is dirty this should be cleaned with any normal domestic glass cleaner.

Edwards Solar Hot Water Installation Manual

Booster System not operating. For electric systems, the fuse, circuit breaker supplying the system should be checked. If the time clock (where fitted) and the fuse or circuit breaker are operational and the water is cold, you can
turn the booster isolator on and off to see if the electricity meter speed changes. If there is no change in speed, it indicates there may be a booster problem and a service call will be necessary. It is important to remember – Do not open or adjust any electrical covers or devices yourself.
For gas systems the gas and electric supplies to the gas heater should be checked to ensure they are both on. If water temperature from the gas heater is below 60°C and both supplies are on and the gas heater does not ignite there may be a problem and a service call will be necessary.
Is there excessive water discharge for the Valves?
If there is a discharge of more than 9 litres per day from any of the systems valves, it indicates there is a problem that requires a service call.

Are you using more hot water than you think?
Often the hot water usage of showers, washing machines and dishwashers is under estimated. Review these appliances to determine if your daily usage is greater than the storage volume of your water heater. If the system contains 300 litres of hot water and your usage is greater than 300 litres there may be periods where the water temperature is slightly lower than normal. It is also advisable to inspect tap washers etc. for leakage and replace if necessary.

Solar Satisfaction

Once your system has been installed it is important to us that you are completely satisfied with both your product and level of service and that your solar investment lives up to your expectations both now and into the future. We want you to know we are here to provide ongoing assistance when you need it.

Please keep your email current with us so we can stay in touch with important updates and service reminders.

Edwards Solar Hot Water User Manual

We would appreciate your feedback when ever you have time to give. At any point after the installation of either a solar power and solar hot water system you can send us your thought and recommendations.

Thank you for your participation, we value your feedback to improve our customer service and ensure you are completely satisfied with your solar installation.

To harness the sunlight and natural rays of the sun, the solar hot water is the most cost effective and practical choice too. Edwards solar hot water manualwill state how the water is being transformed into hot water by harnessing the sun energy in an effective manner. Solar thermal plant or system will absorb the heat of the sun and use the same to heat your water at home or office states the Edwards solar hot water manual, when you use such a water for your heating needs you will be able to save and protect your environment from the harmful CO2 rays and pollution. Normally the solar hot water system from the Edwards solar hot water manual will very easily heat the water up to 140 degree and even more, whereas this is not possible in the traditional hot water system. This effective system will be able to collect 70% of the energy from the sun and then transfer them to you as hot water for your purpose. The Edwards solar hot water manual provides two types of heating system – direct and indirect water heating system.edwards solar hot water element

Direct solar water heat system – as stated in the Edwards solar hot water manual the system will capture the direct hear from the sun and collect it directly so that it will heat the water and supply the same for office or houses. The system as per the Edwards solar hot water manual consists of pipes that will be filled with water and this is linked with the insulated storage tank that is placed inside the home. When the sun rays fall the water inside the pipe will get heated and this will fall into the storage tanker as hot water. The solar hot water direct system will need more maintenance than the indirect one as the pipes have to be cleared of the mineral deposits. The Edwards solar hot water manual states that the direct system will work best in the warm climate conditions as the system will not be prone to freezing.edwards solar hot water troubleshooting

The indirect solar water heat system – as stated in the Edwards solar hot water manual the indirect system will not heat the water directly but in fact will use the fluids with low freeze point and absorb the radiant energy of the sun. This is also called as the closed loop system as the indirect solar hot water will absorb the sun ray as heat into pipes and evacuate the air which again will turn the heat into the pipe. This ways the solar collection is maximised and this type of system is more suitable for commercial purposes mainly.

Thus you can use the solar hot water system for your home and you can transform the normal water into heat water without spending much of time, energy and cost. The solar hot water system will prove to be the best and effective heating system for both domestic and commercial purposes. Read through http://www.solarhotwaterparts.com.au and know more about the various types of solar hot water system.